Gateway Upgrade| Senzo IoT

Gateway Upgrade v3.00

Steps and Precaution to take when upgrading your Senzo IoT Gateway's software


Follow the steps below to upgrade your Senzo IoT Gateway's software to v3.00



WARNING: PLEASE READ BEFORE UPGRADING


· All data in the USB Flash Drive will be lost during upgrade, do not leave any important file inside.
· Do not turn off the IoT Gateway during the update process.
· Do not unplug the USB flash drive during the whole process.
· Upgrade interruption may result in the device to be unusable.



STEPS ON COMPUTER :

  1. Download the upgrade file from here into your PC.
  2. Prepare an empty 4GB USB flash drive and copy the downloaded file into the USB flash drive.
  3. Open the side cover of your IoT Gateway at the side where the setup button is located.
  4. Plug in the USB flash drive into the USB port available inside.
  5. In Senzo Pro Mobile Application, go to setting page and click on Upgrade.
  6. The upgrade process will start. The process may take up to One To Two Hours.
  7. During the upgrade process, the power LED will light up while the others will be Off.
  8. When the upgrade process is done, the IoT Gateway will restart itself and it will take some time to restore your previous data.
  9. When the process is done, you will be able to login again as usual.
  10. You can check in Senzo Pro Mobile Application by tapping  icon on the main screen, your gateway version should show "v3.00" on it


WHERE TO FIND UPGRADE FEATURE ON SENZO PRO APP :




1.

From the main page of the app, tap on the " side menu" icon .




2.

At the side menu, tap on the "settings" icon.




3.

Next, tap the "Upgrade Gateway", follow the steps that come up after that.



Top